Available Now

Marking

Laser Marking & Engraving

Permanent marking and engraving on metals, plastics, and coated surfaces. Laser marking is ideal for part identification, branding, serial numbers, barcodes, and decorative finishes — with no consumables and no contact with the workpiece.

Whether you need one-off custom engraving or batch marking across a production run, we can handle it. Marks are precise, permanent, and won't wear off like ink or labels.

Part numbers, serial numbers, and traceability marking
Logos, branding, and decorative engraving
Barcodes, QR codes, and data matrix codes
Annealing, etching, and deep engraving
Metals, plastics, and anodised surfaces
Medical-grade marking for instruments and devices
One-off and batch production runs

Laser marking services

Available Now

Additive

3D Printing

Additive manufacturing for prototypes, functional parts, jigs, fixtures, tooling, and end-use components. 3D printing is ideal when you need complex geometry, fast turnaround, or low-volume production without tooling costs.

We print in engineering-grade materials that are tough enough for real-world use — not just show models. If you need a part that has to work, not just look right, we can deliver.

Rapid prototyping — test fit and function before committing to production
Jigs, fixtures, and tooling
End-use parts and functional components
Complex geometry that can't be easily machined or fabricated
Low-volume and one-off production
Engineering-grade thermoplastics

3D printing services Upload & get instant quote

Available Now

Design

3D Design & CAD

Don't have a file? Not a problem. We design parts from scratch — from a rough sketch on paper, a photo of a broken component, a verbal description, or measurements taken on site.

We produce full 3D models and manufacturing-ready files so your part can go straight to cutting, printing, or fabrication with no ambiguity. You get the files to keep, so reordering is straightforward.

3D modelling from sketches, samples, or descriptions
Manufacturing-ready file output (STEP, DXF, STL, IGES)
Reverse engineering — recreate parts from a physical sample
Design for manufacture — we'll flag anything that's hard to make
Iterative design — revisions until the part is right
You own the files — use them however you need

Available Now

Scanning

3D Scanning

High-accuracy 3D scanning for reverse engineering, quality inspection, digital archiving, and scan-to-print workflows. If you need a digital copy of a physical object — whether it's a worn part that needs replacing, a component you want to modify, or something you need to replicate — we can scan it.

Our scanning system captures full-colour, high-resolution 3D data that can be exported directly to CAD or sent straight to 3D printing. Got a broken part with no drawings? We can scan it, clean up the model, and 3D print a replacement — all in-house, no third parties involved. We handle objects from as small as 10 mm right up to 2000 mm — from small fittings and brackets through to panels, housings, and assemblies.

Accuracy up to 0.02 mm — suitable for engineering and inspection
Adjustable resolution from 0.05 mm to 2 mm depending on detail required
Object size range: 10 mm to 2000 mm
Full-colour 3D capture
Export to STL, OBJ, PLY, and 3MF
Reverse engineering — scan a part and recreate it in CAD
Scan-to-print — go from physical object to 3D print without manual modelling
Quality inspection — compare scanned data against original CAD models

3D scanning services

Available Now

Development

Prototyping & Development

Got an idea for a part or product but not sure how to get it made? That's where we come in. We offer a full prototyping service that takes your concept — whether it's a sketch, a description, or a rough sample — and turns it into a production-ready part.

We work with you at every stage. We'll discuss your requirements, design the part in 3D CAD, print a prototype for you to test, make revisions based on your feedback, and then produce the final part using whichever manufacturing process suits best.

This isn't just a design service bolted onto a manufacturing service — it's a proper collaborative process. We'll advise on materials, tolerances, manufacturing methods, and design changes that can save you time and money before you commit to production.

Initial consultation — understand your requirements and constraints
Concept development — 3D CAD design from your brief
Rapid prototyping — 3D printed test parts for fit and function
Design iteration — revise and refine until it's right
Material and process selection — we'll recommend what suits the job
Production transition — final manufacturing via water jet, 3D print, or fabrication
File handover — you own all design files for future production

Coming Soon

Cutting

Water Jet Cutting

High-pressure abrasive water jet cutting for flat profiles in virtually any material. Water jet is a cold cutting process — no heat-affected zone, no thermal distortion, and no change to material properties.

We program directly from your DXF or CAD files. Parts are nested efficiently to minimise material waste, and we can cut anything from a single prototype to a full production run.

Abrasive cutting for metals, stone, glass, and ceramics
Pure water cutting for rubber, foam, gasket, and soft materials
Thick section capability — up to 150mm depending on material
Positional accuracy of ±0.1mm
Complex profiles and tight internal radii
Clean edge finish — most jobs need no secondary work

Water Jet Materials

What we cut

Water jet cuts virtually anything that isn't tempered glass or diamond. If your material isn't listed, ask — we've probably cut it before.

Mild Steel

Plate, flat bar, floor plate. All common grades.

Stainless Steel

304, 316, duplex. Sheet and plate.

Aluminium

5052, 6061, 7075, plate and extrusion profiles.

Brass & Copper

Sheet and plate in various thicknesses.

Tool Steel & Hardened Steel

No heat input means no temper loss.

Titanium

Grade 2, Grade 5. No HAZ, no embrittlement.

Stone, Tile & Ceramic

Granite, marble, porcelain. Intricate inlays and shapes.

Glass

Float glass, laminated glass. Not tempered.

Composites

Carbon fibre, fibreglass, Kevlar. No delamination.

Rubber & Gasket

Natural rubber, neoprene, silicone, cork. Pure water cut.

Plastics

Acrylic, polycarbonate, nylon, HDPE, UHMWPE.

Foam

EVA, polyurethane, closed-cell. Pure water — clean edges.

Coming Soon

Fabrication

Parts Fabrication

We combine our cutting, printing, and design capabilities to deliver finished parts — not just raw profiles or loose components. If your part needs multiple processes to complete, we can manage the full job.

From one-off replacements to short production runs, we fabricate custom parts for local industry, agriculture, motorsport, and anyone else who needs something made properly.

One-off and short-run production
Replacement parts for obsolete or unavailable components
Multi-process jobs — design, cut, print, assemble
Prototype development and iteration
Customer-supplied or we can source material
Every part inspected before it leaves the shop

Interested in these services? Get in touch and check back soon.

Got a job for us?

Send through your files, drawings, or a description of what you need. We'll have a look and get back to you with a straight answer.

Get in Touch